Embedded Files
Safety First. Reliability Always.
Safety First. Reliability Always.
When fire strikes, seconds count. Don't leave your community’s protection to chance—choose systems engineered to perform under extreme pressure. At Gearforce, our fire protection systems exceed industry standards, delivering uncompromising quality and absolute peace of mind when it matters most.
FIRE DELUGE CONTROL VALVES
FIRE DELUGE CONTROL VALVES
We supply UL Listed deluge valves engineered for high-hazard fire protection. Designed for instantaneous, large-volume water or foam discharge, our systems provide fast, aggressive suppression where rapid fire spread is a risk. Built for maximum reliability and durability, our deluge valves are trusted worldwide in critical environments, including oil and gas facilities, power plants, chemical processing units, aircraft hangars, tank farms, and heavy industrial sites.
We supply UL Listed deluge valves engineered for high-hazard fire protection. Designed for instantaneous, large-volume water or foam discharge, our systems provide fast, aggressive suppression where rapid fire spread is a risk. Built for maximum reliability and durability, our deluge valves are trusted worldwide in critical environments, including oil and gas facilities, power plants, chemical processing units, aircraft hangars, tank farms, and heavy industrial sites.
Electric/Pneumatically Operated Deluge Valve
Electric/Pneumatically Operated Deluge Valve
Diameter 3″, 4″, 6″ & 8″ .
The valve shall be a non-modulating pilot operated deluge valve which will open quickly when either the solenoid pilot valve is energized or a pneumatic pilot control signal is released or lost. UL LIsted, diaphragm actuated
Electric Operated Deluge Valve
Electric Operated Deluge Valve
Diameter 3″, 4″, 6″ & 8″ .
The valve shall be a non-modulating pilot operated deluge valve which will open quickly when the solenoid pilot valve is energized.
UL single chamber, diaphragm actuated, full port model.
Corrosive Environments Deluge Valve
Corrosive Environments Deluge Valve
Diameter 2″, 3″, 4″, 6″ & 8″ .
Material: Nickel Aluminium Bronze BS1400 Gr AB2
Easily trimmed for actuation by manual, remote solenoid valve & with wet or dry pilot
Diaphragm operated with rubber to metal drip-tight positive sealing
Pre-assembled and factory tested Deluge Valve Skid
Pre-assembled and factory tested Deluge Valve Skid
Diameter up to 36’’.
Actuator: Double Acting Piston
Quick and convenient installation
Internally wired
Compact, asthetically pleasing appearance
Cost effective and reduced installation time
Fire Foam Systems
Fire Foam Systems
Fire foam suppression systems are vital for protecting high-hazard environments like oil refineries, chemical plants, hangars, and marine vessels. By forming a protective barrier over flammable surfaces, our foam rapidly smothers flames, cools the area, and prevents re-ignition.
FIRE FOAM DISCHARGE EQUIPMENT
FIRE FOAM DISCHARGE EQUIPMENT
Our foam discharge equipment is engineered to deliver precise, effective suppression across high-hazard storage and processing applications:
Air Aspirating Foam Water Sprinklers
Air Aspirating Foam Water Sprinklers
Size 1/2" NPT / BSPT
Made in Bronze or Stain Steel
K Factor: 2.95
Pressure Range: 30 - 60 psi
Foam Tank for Fixed Roof Tank
Foam Tank for Fixed Roof Tank
Size 2", 2.5", 3", 4", 6"
Made in Carbon Steel or Stainless Steel
Flow Range: 45 lpm - 1250 lpm
Pressure Range: 40 - 100 psi
Rim Seal Foam Pourers for Floating Roof Tank
Rim Seal Foam Pourers for Floating Roof Tank
Size 2."5
Made in Carbon Steel or Stainless Steel
Flow Range: 50 lpm - 550 lpm
Pressure Range: 30 - 100 psi
Oil Floating Roof Fire Foam Maker
Oil Floating Roof Fire Foam Maker
Size: 2" and 2.5".
Flow 75 to 550 LPM
Working pressure 40 to 100 PSI
Carbon Steel or Stainless Steel construction
FIRE STATION MONITORS - Industrial, Oil and Gas
FIRE STATION MONITORS - Industrial, Oil and Gas
Our water & foam fire-fighting monitor range includes manual, oscillating and remote-controlled monitors offering small and big flow rates, having galvanized carbon steel, stainless steel, and bronze material of construction, fixed as well as trailer-mounted models.
Fixed Station Industrial Fire Monitors
Fixed Station Industrial Fire Monitors
Inlet Size: 3" and 4" Flanged
Flow rate of up to 1250 GPM
Made in Corrosion resistant brass construction
Highly maneuverable and easy to operate
Oscillating Industrial Fire Monitors
Oscillating Industrial Fire Monitors
Inlet Size: 3" and 4" Flanged
Flow rate of up to 1250 GPM
Vertical Travel: 140° from 85° above to 55° below horizontal
Rotational Travel: 30° to 330° adjustable
Self-Educting Industrial Fire Monitors
Self-Educting Industrial Fire Monitors
Inlet Size: 3" and 4" Flanged
Made in Bronze or Stainless Steel
Flow Range: 500 - 1000 gpm
Max Working Pressure: 175 psi
Electric Remote Controlled Fire Monitors
Electric Remote Controlled Fire Monitors
Nominal Size: 100 mm (4")
Flow 500 to 1000 GPM
Working pressure 175 PSI
Stainless Steel construction
Generally used for protection of flammable liquid storage tanks, loading racks, jetty, terminals
Portable Fire Foam Equipment
Portable Fire Foam Equipment
Engineered for rapid fire suppression, the GF mobile foam unit is a self-contained solution built for quick deployment in high-risk environments—including loading terminals, oil storage sites, boiler rooms, engine compartments, and chemical spill zones. To ensure maximum reliability and safety compliance, the inline inductor and foam branch pipes used with our mobile units are FM approved. Additionally, select monitors can be trailer-mounted to create specialized, versatile mobile systems.
For full technical specifications across our complete range of fire suppression systems, please refer to our product catalogs.
Portable Ground Foam Water Fire Monitor
Portable Ground Foam Water Fire Monitor
Size Inlet: 2x2.5’’ or 4" Flanged
Vertical: 63° from 12° to 75° above with inbuilt 37° safety stop from 18° to 55° above
Flow to 1000 gpm
Working pressure 100 PSI
Foam Tank for Fixed Roof Tank
Foam Tank for Fixed Roof Tank
Diameter up to 60’’.
1 piece Body with integral ends
Certification: API 6D / API 6A
Actuator: Diaphragm or Electric
Rim Seal Foam Pourers for Floating Roof Tank
Rim Seal Foam Pourers for Floating Roof Tank
Size 2."5
Made in Carbon Steel or Stainless Steel
Flow Range: 50 lpm - 550 lpm
Pressure Range: 30 - 100 psi
Mobile Fire Foam Bladder Tank Cart
Mobile Fire Foam Bladder Tank Cart
Foam Capacity: 120, 150, 180 lt
Flow 75 to 550 LPM
Working pressure 40 to 100 PSI
Carbon Steel or Stainless Steel construction
Foam Proportioning Systems
Foam Proportioning Systems
Fire foam proportioning systems are mechanical or electronic units engineered to blend fire-fighting foam concentrate with water at a precise percentage (typically 1%, 3%, or 6%). This mixture forms a "foam solution" that aerates to create a vapor-suppressing blanket over Class B liquid fires. Under-proportioning weakens the protective barrier, while over-proportioning wastes costly agent and depletes the supply prematurely.
Bladder Tank Foam Proportiong Systems
Bladder Tank Foam Proportiong Systems
Foam Bladder Tanks deliver reliable foam proportioning for low-expansion firefighting systems. Operating via water pressure against an internal elastomeric bladder, the tank automatically feeds foam concentrate into a ratio controller to supply discharge devices in the hazard area. Available in horizontal or vertical pre-piped configurations with UL, FM, and CE approvals
Skid Mounted Balance Pressure Foam Proportiong Systems
Skid Mounted Balance Pressure Foam Proportiong Systems
The Balanced Pressure Pump Skid System delivers precise foam concentrate proportioning across wide flow and pressure ranges with fully automatic operation. Suitable for high-hazard environments, it integrates seamlessly into fixed systems and mobile equipment for applications like aircraft hangars, loading racks, tank farms, and offshore facilities.
Skid Mounted Inline Balanced Pressure Foam Proportiong
Skid Mounted Inline Balanced Pressure Foam Proportiong
The Inline Balanced Pressure Proportioner (ILBP) enables simultaneous foam injection across multiple application points—even at varying operating pressures—using a single concentrate supply line. By combining different proportioner sizes, the system can be tailored to meet the specific flow requirements of each hazard area. The ILBP is UL Listed.
Page updated
Report abuse